Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions

QTabDialog Class Reference

The QTabDialog class provides a stack of tabbed widgets. More...

#include <qtabdialog.h>

Inherits QDialog.

List of all member functions.

Public Members

• QTabDialog ( QWidget * parent = 0, const char * name = 0, bool modal = FALSE, WFlags f = 0 )
• ~QTabDialog ()
• virtual void setFont ( const QFont & font )
• void addTab ( QWidget * child, const QString & label )
• void addTab ( QWidget * child, const QIconSet & iconset, const QString & label )
• void addTab ( QWidget * child, QTab * tab )
• void insertTab ( QWidget * child, const QString & label, int index = -1 )
• void insertTab ( QWidget * child, const QIconSet & iconset, const QString & label, int index = -1 )
• void insertTab ( QWidget * child, QTab * tab, int index = -1 )
• void changeTab ( QWidget * w, const QString & label )
• void changeTab ( QWidget * w, const QIconSet & iconset, const QString & label )
• bool isTabEnabled ( QWidget * w ) const
• void setTabEnabled ( QWidget * w, bool enable )
• bool isTabEnabled ( const char * name ) const  (obsolete)
• void setTabEnabled ( const char * name, bool enable )  (obsolete)
• void showPage ( QWidget * w )
• void removePage ( QWidget * w )
• QString tabLabel ( QWidget * w )
• QWidget * currentPage () const
• void setDefaultButton ( const QString & text )
• void setDefaultButton ()
• bool hasDefaultButton () const
• void setHelpButton ( const QString & text )
• void setHelpButton ()
• bool hasHelpButton () const
• void setCancelButton ( const QString & text )
• void setCancelButton ()
• bool hasCancelButton () const
• void setApplyButton ( const QString & text )
• void setApplyButton ()
• bool hasApplyButton () const
• void setOkButton ( const QString & text )
• void setOkButton ()
• bool hasOkButton () const

Signals

• void aboutToShow ()
• void applyButtonPressed ()
• void cancelButtonPressed ()
• void defaultButtonPressed ()
• void helpButtonPressed ()
• void currentChanged ( QWidget * )
• void selected ( const QString & )  (obsolete)

Protected Members

• void setTabBar ( QTabBar * tb )
• QTabBar * tabBar () const

Detailed Description

The QTabDialog class provides a stack of tabbed widgets.

A tabbed dialog is one in which several "tab pages" are available. By clicking on a tab page's tab or by pressing the indicated Alt+letter key combination, the user can select which tab page they want to use.

QTabDialog provides a tab bar consisting of single row of tabs at the top; each tab has an associated widget which is that tab's tab page. In addition, QTabDialog provides an OK button and the following optional buttons: Apply, Cancel, Defaults and Help.

The normal way to use QTabDialog is to do the following in the constructor:

1. Create a QTabDialog.
2. Create a QWidget for each of the pages in the tab dialog, insert children into it, set up geometry management for it, and use addTab() (or insertTab()) to set up a tab and keyboard accelerator for it.
3. Set up the buttons for the tab dialog using setOkButton(), setApplyButton(), setDefaultsButton(), setCancelButton() and setHelpButton().
4. Connect to the signals and slots.

If you don't call addTab() the page you have created will not be visible. Don't confuse the object name you supply to the QWidget constructor and the tab label you supply to addTab(); addTab() takes user-visible name that appears on the widget's tab and may identify an accelerator, whereas the widget name is used primarily for debugging.

Almost all applications have to connect the applyButtonPressed() signal to something. applyButtonPressed() is emitted when either OK or Apply is clicked, and your slot must copy the dialog's state into the application.

There are also several other signals which may be useful:

• cancelButtonPressed() is emitted when the user clicks Cancel.
• defaultButtonPressed() is emitted when the user clicks Defaults; the slot it is connected to should reset the state of the dialog to the application defaults.
• helpButtonPressed() is emitted when the user clicks Help.
• aboutToShow() is emitted at the start of show(); if there is any chance that the state of the application may change between the creation of the tab dialog and the time show() is called, you must connect this signal to a slot that resets the state of the dialog.
• currentChanged() is emitted when the user selects a page.

Each tab is either enabled or disabled at any given time (see setTabEnabled()). If a tab is enabled the tab text is drawn in black and the user can select that tab. If it is disabled the tab is drawn in a different way and the user cannot select that tab. Note that even if a tab is disabled, the page can still be visible; for example, if all of the tabs happen to be disabled.

You can change a tab's label and iconset using changeTab(). A tab page can be removed with removePage() and shown with showPage(). The current page is given by currentPage().

QTabDialog does not support tabs on the sides or bottom, nor can you set or retrieve the visible page. If you need more functionality than QTabDialog provides, consider creating a QDialog and using a QTabBar with QTabWidgets.

Most of the functionality in QTabDialog is provided by a QTabWidget.

See also QDialog and Dialog Classes.

Member Function Documentation

QTabDialog::QTabDialog ( QWidget * parent = 0, const char * name = 0, bool modal = FALSE, WFlags f = 0 )

QTabDialog::~QTabDialog ()

void QTabDialog::aboutToShow () [signal]

This signal is emitted by show() when it is time to set the state of the dialog's contents. The dialog should reflect the current state of the application when it appears; if there is any possibility that the state of the application may change between the time you call QTabDialog::QTabDialog() and QTabDialog::show(), you should set the dialog's state in a slot and connect this signal to it.

This applies mainly to QTabDialog objects that are kept around hidden, rather than being created, shown, and deleted afterwards.

See also applyButtonPressed(), show(), and cancelButtonPressed().

void QTabDialog::addTab ( QWidget * child, const QString & label )

The new page is child; the tab's label is label. Note the difference between the widget name (which you supply to widget constructors and to setTabEnabled(), for example) and the tab label. The name is internal to the program and invariant, whereas the label is shown on-screen and may vary according to language and other factors.

If the tab's label contains an ampersand, the letter following the ampersand is used as an accelerator for the tab, e.g. if the label is "Bro&wse" then Alt+W becomes an accelerator which will move the focus to this tab.

If you call addTab() after show() the screen will flicker and the user may be confused.

See also insertTab().

void QTabDialog::addTab ( QWidget * child, const QIconSet & iconset, const QString & label )

This version of the function shows the iconset as well as the label on the tab of child.

void QTabDialog::addTab ( QWidget * child, QTab * tab )

This is a lower-level method for adding tabs, similar to the other addTab() method. It is useful if you are using setTabBar() to set a QTabBar subclass with an overridden QTabBar::paint() function for a subclass of QTab.

The child is the widget to be placed on the new tab page. The tab is the tab to display on the tab page -- normally this shows a label or an icon that identifies the tab page.

void QTabDialog::applyButtonPressed () [signal]

This signal is emitted when either the Apply or OK button is clicked.

It should be connected to a slot (or several slots) that change the application's state according to the state of the dialog.

See also cancelButtonPressed(), defaultButtonPressed(), and setApplyButton().

void QTabDialog::cancelButtonPressed () [signal]

This signal is emitted when the Cancel button is clicked. It is automatically connected to QDialog::reject(), which will hide the dialog.

The Cancel button should not change the application's state at all, so you should generally not need to connect it to any slot.

See also applyButtonPressed(), defaultButtonPressed(), and setCancelButton().

void QTabDialog::changeTab ( QWidget * w, const QIconSet & iconset, const QString & label )

void QTabDialog::changeTab ( QWidget * w, const QString & label )

Defines a new label for the tab of page w

void QTabDialog::currentChanged ( QWidget * ) [signal]

This signal is emitted whenever the current page changes.

See also currentPage(), showPage(), and tabLabel().

QWidget * QTabDialog::currentPage () const

void QTabDialog::defaultButtonPressed () [signal]

This signal is emitted when the Defaults button is pressed. It should reset the dialog (but not the application) to the "factory defaults".

The application's state should not be changed until the user clicks Apply or OK.

See also applyButtonPressed(), cancelButtonPressed(), and setDefaultButton().

bool QTabDialog::hasApplyButton () const

See also setApplyButton(), applyButtonPressed(), hasCancelButton(), and hasDefaultButton().

bool QTabDialog::hasCancelButton () const

See also setCancelButton(), cancelButtonPressed(), hasApplyButton(), and hasDefaultButton().

bool QTabDialog::hasDefaultButton () const

See also setDefaultButton(), defaultButtonPressed(), hasApplyButton(), and hasCancelButton().

bool QTabDialog::hasHelpButton () const

See also setHelpButton(), helpButtonPressed(), hasApplyButton(), and hasCancelButton().

bool QTabDialog::hasOkButton () const

See also setOkButton(), hasApplyButton(), hasCancelButton(), and hasDefaultButton().

void QTabDialog::helpButtonPressed () [signal]

This signal is emitted when the Help button is pressed. It could be used to present information about how to use the dialog.

See also applyButtonPressed(), cancelButtonPressed(), and setHelpButton().

void QTabDialog::insertTab ( QWidget * child, const QString & label, int index = -1 )

The new page is child; the tab's label is label. Note the difference between the widget name (which you supply to widget constructors and to setTabEnabled(), for example) and the tab label. The name is internal to the program and invariant, whereas the label is shown on-screen and may vary according to language and other factors.

If the tab's label contains an ampersand, the letter following the ampersand is used as an accelerator for the tab, e.g. if the label is "Bro&wse" then Alt+W becomes an accelerator which will move the focus to this tab.

If index is not specified, the tab is simply added. Otherwise it is inserted at the specified position.

If you call insertTab() after show(), the screen will flicker and the user may be confused.

See also addTab().

void QTabDialog::insertTab ( QWidget * child, const QIconSet & iconset, const QString & label, int index = -1 )

This version of the function shows the iconset as well as the label on the tab of child.

void QTabDialog::insertTab ( QWidget * child, QTab * tab, int index = -1 )

This is a lower-level method for inserting tabs, similar to the other insertTab() method. It is useful if you are using setTabBar() to set a QTabBar subclass with an overridden QTabBar::paint() function for a subclass of QTab.

The child is the widget to be placed on the new tab page. The tab is the tab to display on the tab page -- normally this shows a label or an icon that identifies the tab page. The index is the position where this tab page should be inserted.

bool QTabDialog::isTabEnabled ( QWidget * w ) const

See also setTabEnabled() and QWidget::enabled.

bool QTabDialog::isTabEnabled ( const char * name ) const

Returns TRUE if the page with object name name is enabled and FALSE if it is disabled.

If name is 0 or not the name of any of the pages, isTabEnabled() returns FALSE.

See also setTabEnabled() and QWidget::enabled.

void QTabDialog::removePage ( QWidget * w )

See also showPage(), QTabWidget::removePage(), and QWidgetStack::removeWidget().

void QTabDialog::selected ( const QString & ) [signal]

This signal is emitted whenever a tab is selected (raised), including during the first show().

See also raise().

void QTabDialog::setApplyButton ( const QString & text )

The Apply button should apply the current settings in the dialog box to the application while keeping the dialog visible.

When Apply is clicked, the applyButtonPressed() signal is emitted.

If text is a null string, no button is shown.

See also setCancelButton(), setDefaultButton(), and applyButtonPressed().

void QTabDialog::setApplyButton ()

Adds an Apply button to the dialog. The button's text is set to a localizable "Apply".

void QTabDialog::setCancelButton ( const QString & text )

The cancel button should always return the application to the state it was in before the tab view popped up, or if the user has clicked Apply, back to the state immediately after the last Apply.

When Cancel is clicked, the cancelButtonPressed() signal is emitted. The dialog is closed at the same time.

If text is a null string, no button is shown.

See also setApplyButton(), setDefaultButton(), and cancelButtonPressed().

void QTabDialog::setCancelButton ()

Adds a Cancel button to the dialog. The button's text is set to a localizable "Cancel".

void QTabDialog::setDefaultButton ( const QString & text )

The Defaults button should set the dialog (but not the application) back to the application defaults.

When Defaults is clicked, the defaultButtonPressed() signal is emitted.

If text is a null string, no button is shown.

See also setApplyButton(), setCancelButton(), and defaultButtonPressed().

void QTabDialog::setDefaultButton ()

Adds a Defaults button to the dialog. The button's text is set to a localizable "Defaults".

void QTabDialog::setFont ( const QFont & font ) [virtual]

If the widget is visible, the display is updated with the new font immediately. There may be some geometry changes, depending on the size of the old and new fonts.

Reimplemented from QWidget.

void QTabDialog::setHelpButton ( const QString & text )

When Help is clicked, the helpButtonPressed() signal is emitted.

If text is a null string, no button is shown.

See also setApplyButton(), setCancelButton(), and helpButtonPressed().

void QTabDialog::setHelpButton ()

Adds a Help button to the dialog. The button's text is set to a localizable "Help".

void QTabDialog::setOkButton ( const QString & text )

When the OK button is clicked, the applyButtonPressed() signal is emitted, and the current settings in the dialog box should be applied to the application. The dialog then closes.

If text is a null string, no button is shown.

See also setCancelButton(), setDefaultButton(), and applyButtonPressed().

void QTabDialog::setOkButton ()

Adds an OK button to the dialog. The button's text is set to a localizable "OK".

void QTabDialog::setTabBar ( QTabBar * tb ) [protected]

See also tabBar().

void QTabDialog::setTabEnabled ( QWidget * w, bool enable )

QTabWidget uses QWidget::setEnabled() internally, rather than keeping a separate flag.

Note that even a disabled tab and tab page may be visible. If the page is already visible QTabWidget will not hide it; if all the pages are disabled QTabWidget will show one of them.

See also isTabEnabled() and QWidget::enabled.

void QTabDialog::setTabEnabled ( const char * name, bool enable )

Finds the page with object name name, enables/disables it according to the value of enable and redraws the page's tab appropriately.

QTabDialog uses QWidget::setEnabled() internally, rather than keeping a separate flag.

Note that even a disabled tab/page may be visible. If the page is already visible QTabDialog will not hide it; if all the pages are disabled QTabDialog will show one of them.

The object name is used (rather than the tab label) because the tab text may not be invariant in multi-language applications.

See also isTabEnabled() and QWidget::enabled.

void QTabDialog::showPage ( QWidget * w )

Warning: If used carelessly, this function can easily surprise or confuse the user.

See also QTabBar::currentTab.

QTabBar * QTabDialog::tabBar () const [protected]

See also setTabBar().

QString QTabDialog::tabLabel ( QWidget * w )

This file is part of the Qt toolkit. Copyright © 1995-2005 Trolltech. All Rights Reserved.